Cannot Log In To Cisco ASA ASDM after config IPS

[superlubis]

asa guru,

I Have Cisco 5540 with AIP-SSM-40, recently i config AIP-SSM-40 to capture all traffic from all interface any to any with promiscous mode and if card fail traffic still flow throuh asa, but after that i can't login to cisco ASDM, the error is "Un Able To Launch Device Manager From xx.xx.xx.xx"

Thx                  

[deyster94]

If you can still connect to the CLI, go in and remove the IPS configuration from the ASA itself.  All should need to do is remove the IPS from the service policy.  See if this gets you back in.  Also do a sh run http and see if the configuration looks good. 

I can't say that after configuring an IPS module I couldn't get back into the ASDM.

[superlubis]

i can ssh to Cisco ASA, i curios what cause this

And i do "sh run http" and i see my ip computer subnet allowed http server.

what block ? whats the cause ? is there any debug command to trace the problem ?