12-30-2009 08:30 AM - edited 03-11-2019 09:52 AM
have l2l vpn connection with remote location. They have asa 5505 we have asa 5520 as firewall/vpn devices. I can communicate with EVERYTHING at the remote location except the 10.244.12.1 (asa inside interface) from headquarters. I can remote to a pc at that location and manage it fine, but need to be able to do it from HQ. config is attached. thanks for any advice.
Solved! Go to Solution.
12-30-2009 08:47 AM
Could you remove this line
management-access mgmt
and add this one?
management-access inside
Also, you are only allowing ssh to the mgmt interface. Make sure to allow that to the inside interface as well.
-KS
12-30-2009 08:47 AM
Could you remove this line
management-access mgmt
and add this one?
management-access inside
Also, you are only allowing ssh to the mgmt interface. Make sure to allow that to the inside interface as well.
-KS
12-30-2009 08:58 AM
Thank you, The management-access mgmt line wasnt in there to remove, so I simply added the management-access inside.....that did the trick... I have been banging my head against the wall.....I knew it would be something simple. thanks again
12-30-2009 09:05 AM
Glad to hear. Thanks for rating.
I thought I saw the line in the config. May be I looked at some other config.
If it is not there then yes, you just simply add that line.
-KS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide