Cisco ASA 5200 - Multiple External IPs

[jonimac83]

Hi,

I'm setting up a network with 2x Cisco routers in front, going to 2x Cisco ASA 5200 (in Failover) and then onto the network. We've a /24 Public IP range and was wondering what was the best way to configure the firewalls. I've heard the Transparent Mode has VPN issues, the Firewalls themselves wouldn't be controlling VPN, we'd pass it through to an ISA box. Is there a better way of doing this however?

Thanks in advance,

Joni.

[smahbub]

VPN failover is not supported on units running in multiple context modes. VPN failover is available for Active/Standby failover configurations only.

For training go to this link, it has some training for the ASA:

http://www.cisco.com/web/learning/le31/le29/configuring_asa_pix_security_appliances.html

[jonimac83]

Thanks.

I'm happy enough to use active/passive just as long as it won't present any issues with our connection! Will read through the link and see what I end up with!

CHeers,

Jonny.