12-14-2011 05:41 AM - edited 03-11-2019 03:01 PM
Hi,
we have cisco ASA 5510 with ios ver 8.0(4).
we are getting following log. what is the root cause for this & what should we do to resolve.
2011-12-10 00:00:42 Local4.Warning 172.26.4.203 %ASA-4-733100: [ Scanning] drop rate-1 exceeded. Current burst rate is 10 per second, max configured rate is 10; Current average rate is 39 per second, max configured rate is 5; Cumulative total count is 23497
2011-12-10 00:00:42 Local4.Warning 172.26.4.203 %ASA-4-733100: [ Scanning] drop rate-2 exceeded. Current burst rate is 8 per second, max configured rate is 8; Current average rate is 39 per second, max configured rate is 4; Cumulative total count is 140682
These logg is frequently occured.
Please help us to resolve it
Regards
vinod gupta
Solved! Go to Solution.
12-14-2011 05:56 AM
Hi Vinod,
These logs are generated because of the threat detection enabled on the ASA, when the traffic hitting the firewall exceeds the limits set in those parameters, you will get these error messages.
To check threat-detection, you can do:
show run threat-detection
You can either remove it or tweak the paramaters a bit.
Thanks,
Varun
12-14-2011 05:56 AM
Hi Vinod,
These logs are generated because of the threat detection enabled on the ASA, when the traffic hitting the firewall exceeds the limits set in those parameters, you will get these error messages.
To check threat-detection, you can do:
show run threat-detection
You can either remove it or tweak the paramaters a bit.
Thanks,
Varun
12-26-2011 10:52 PM
thanks varun.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide