Cisco ASA upgrade - enabling Umbrella Roaming Client

[LovejitSingh130013]

Hello Experts 

Looking to upgrade Cisco ASA code to asa9-14-4-23-smp-k8.bin and associated ASDM. 
We are also planning to enable Umbrella roaming client option within AnyConnect Package provisioned through ASA. 

Want to confirm, do I need to anything else than adding these commands. Does it has to be in default Policy ? or it can be in other policy ?

webvpn

anyconnect profiles OrgInfo disk0:/OrgInfo.json

group-policy DfltGrpPolicy attribute

webvpn

anyconnect profiles value OrgInfo type umbrella

Also want to update ASA sfr module, do not know how to do it ?  do I need to update FMC module along with it or its optional ?

Thanks

[Rob Ingram]

@LovejitSingh130013 you need to configure the group-policy that is in use, so it depends on how you've configured your tunnel-group. Run "show vpn-sessiondb detail anyconnect" find an active session and determine the group-policy assigned to the users' session.

To upgrade your SFR module refer to the upgrade guide - https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/firepower-fmc.html

You will need to determine whether your hardware supports an SFR upgrade, refer to the compatibility section - https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/planning.html

The FMC will need to be running the intended version of the FPR module or higher, so you many need to check whether the FMC needs upgrading.