cisco asa

[monsun1423]

I have a running network and dont want to distrub and change any ip configuration . I want to put cisco asa 5505 between router and lan to filter ip traffic.. how can i achive this ? do i need to change anything.. what is bridge mode firewall .

[csaxena]

Hello,

ASA can be  put in network either in Transparent Mode & Router Mode.

Here are links to set ASA :

Transparent Mode : http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml

Router Mode : http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094768.shtml

Hope this helps. Please reply if you need further assistance.

Regards,

Chirag

P.S.: Please mark this thread as answered if you feel your query is answered. Do.rate helpful posts.

[PAUL GILBERT ARIAS]

You can configure your ASA in transparent mode so that you can avoid changing your subnets ir routing. Bridge group is a new feature that allows the ASA to take two or more interfaces and link them together in layer 2 and then having a bvi interface. Veey similar to transparent mode.

Sent from Cisco Technical Support iPhone App