cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1795
Views
0
Helpful
2
Replies

Cisco IPS Sensor Software End-of-Support

 Hello ,

 

we have a cisco asa 5585-SSP20 with ips module , we found on the site cisco that the Cisco IPS Sensor Software 7.3 is End-of-Support  26-APR-201  , we need to know if  the signature updates will not be available after this date?

if yes, our ips can not detect the new intrusions ? and how can we solve this problem knowing that we can not change the equipment for the moment

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

No further IPS updates will be made available. The end of sales / end of life as been announced a long while back and, as you noted, this past April was the absolute final date for any updates.

 

Your legacy IPS, even with updates, has increasingly limited efficacy to counter modern threats in any event.

 

You should work with your local reseller to discuss a replacement product - most likely one of the Cisco Firepower variants (potentially paired with something like AMP for Endpoints or Cisco Umbrella).

View solution in original post

2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

No further IPS updates will be made available. The end of sales / end of life as been announced a long while back and, as you noted, this past April was the absolute final date for any updates.

 

Your legacy IPS, even with updates, has increasingly limited efficacy to counter modern threats in any event.

 

You should work with your local reseller to discuss a replacement product - most likely one of the Cisco Firepower variants (potentially paired with something like AMP for Endpoints or Cisco Umbrella).

thank you very much Marvin for your reply .

 

 

 

Review Cisco Networking for a $25 gift card