Cisco Pix 501 firewall

[adi_bartos24]

I am having a problem with a Cisco Pix 501 firewall.

Iam trying to setup the inside address from 192.168.1.1 ( default ) to 10.10.0.200 and i'm receiving an error :

the ip address does not match with DHCP pool.

I use the web interface and the Hyper terminal telnet .

I would appreciate if you can help me a.s.a.p.

Thank you

[jmia]

Ok, if you are not using the 501 to act as a DHCP server then you'll need to take this feature out.

In configuration mode:

clear dhcpd

save with: write mem

Now you'll be able to change the inside interface IP address i.e.

In configuration mode:

no ip address inside 192.168.1.1

ip address inside 10.10.0.200 255.255.255.0

Again - save with: write mem

Hope this helps and please rate posts.