cisco pix 515e

[rudhsubbu1]

i have purchased old cisco pix 515E i am unable to add ip on interfaces

file 5: origin:16646144 length:308
pixfirewall#
pixfirewall# nameif inside
Type help or '?' for a list of available commands.
pixfirewall#
pixfirewall# config t
pixfirewall(config)# interface Ethernet1
pixfirewall(config)# nameif inside
Not enough arguments.
Usage: nameif <hardware_id> <if_name> <security_lvl>
nameif <vlan_id> <if_name> <security_lvl>
no nameif
pixfirewall(config)#
pixfirewall(config)# security-level 100
Type help or '?' for a list of available commands.
pixfirewall(config)#
pixfirewall(config)#
pixfirewall(config)# ?

[Dennis Mink]

You might want to check this post out, it contains the answer you need

http://www.happyrouter.com/pix-firewall-configuration-from-scratch

Please rate if helpful