cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1709
Views
0
Helpful
2
Replies

Convert Firepower 4125 device to ASA

Brad_Shawh
Level 1
Level 1

Is this even possible?

 

I followed lot of links explaining how this is done, but there is no 'erase' command on this box.

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

Firepower 4000 series and 9300s require you use the Firepower Chassis Manager (FCM) to change or replace the logical device. FTD and ASA instances are logical devices in this context.The 4000 series only supports a single logical device while the 9300 can have multiple.

So you would delete the FTD logical devices from the FCM GUI and then, assuming you have the image on hand, replace it with an ASA logical device.

https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/fxos221/web-guide/b_GUI_FXOS_ConfigGuide_221/logical_devices.html#id_50269

View solution in original post

2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

Firepower 4000 series and 9300s require you use the Firepower Chassis Manager (FCM) to change or replace the logical device. FTD and ASA instances are logical devices in this context.The 4000 series only supports a single logical device while the 9300 can have multiple.

So you would delete the FTD logical devices from the FCM GUI and then, assuming you have the image on hand, replace it with an ASA logical device.

https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/fxos221/web-guide/b_GUI_FXOS_ConfigGuide_221/logical_devices.html#id_50269

Thanks Marvin, that's helpful.

Review Cisco Networking for a $25 gift card