I have been attempting to creat a trunk between a PIX and CatOS. The only VLANs on the trunk are 11 and 20. I've tried the following, but it didn't work. Any ideas? Thank you.
PIX:
interface ethernet1 vlan11 physical
interface ethernet1 vlan20 logical
...
nameif ethernet1 inside security100
nameif vlan20 mct security60
...
ip address inside 192.168.11.254 255.255.255.0
ip address mct 192.168.20.254 255.255.255.0
Catalyst:
Set trunk 4/34 on dot1q 11,20
