Creating VPDN on PIX firewall

[chirag-pandya]

Hello Sir,

I have 1 PIX 520-DC, now i want to creat 1 VPN. my remote site engineers wants to connect or use my corporate services. I have some knowledge about VPN so i can creat it with 2 methodes 1 with Cisco VPN client and 2 with PPTP and L2TP, but i dont know how to configure my PIX for that i want to use local user database for authentication

so please give me some good configuration for both methods,

Thx,

Chirag Pandya

[jmia]

Chirag,

The following documents will help, please choose the most apporiate for your use:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080093f89.shtml

or

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml

or

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800b6099.shtml

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml

For authentication for your client(s), I would suggest that you use RADIUS or TACACS+

Hope this helps, if you need further help please do let me know. Please rate post if this reply helps you.

Jay

[chirag-pandya]

Hello Sir ,

Thx for the replay. i want need some more configuration of Remote access vpn and site-to-site in more depth.

Thx

Chirag Pandya