Hi Guys, I have bought a refurbished firewall and upon reloading I see the following error from console. Is something that I can rectify?
Loading disk0:/asa904-k8.bin... Booting...
Platform ASA5510
Loading...
IO memory blocks requested from bigphys 32bit: 13264
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 104 files, 12459/63613 clusters
dosfsck(/dev/hda1) returned 0
Processor memory 864026624, Reserved memory: 62914560
Total SSMs found: 0
Total NICs found: 7
mcwa i82557 Ethernet at irq 11 MAC: d0d0.fd1d.5d57
mcwa i82557 Ethernet at irq 5 MAC: 0000.0001.0001
i82547GI rev00 Gigabit Ethernet @ irq11 dev 1 index 05 MAC: 0000.0001.0002
i82546GB rev03 Ethernet @ irq09 dev 2 index 03 MAC: d0d0.fd1d.5d5b
i82546GB rev03 Ethernet @ irq09 dev 2 index 02 MAC: d0d0.fd1d.5d5a
i82546GB rev03 Ethernet @ irq09 dev 3 index 01 MAC: d0d0.fd1d.5d59
i82546GB rev03 Ethernet @ irq09 dev 3 index 00 MAC: d0d0.fd1d.5d58
Verify the activation-key, it might take a while...
Running Permanent Activation Key: 0x6122cb5d 0xc06c1a74 0xec92a120 0xbd44e8e8 0x8e372a8a
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
Cluster : Disabled perpetual
This platform has an ASA 5510 Security Plus license.
CTM ERROR: ASA hardware accelerator init failed, cause: boot_init completion timeout, ctm_nlite_boot_init:2284
CTM ERROR: ASA hardware accelerator init failed, cause: boot initialization failure, ctm_nlite_download:3342
CRYPTO ERROR: Microcode download failure, boot instance 0
Cisco Adaptive Security Appliance Software Version 9.0(4)
Thanks in advance
