Custom signature deployment for IOS IPS 5.x
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-07-2007 06:03 PM - edited 03-10-2019 03:49 AM
hi all,
i've wrote some custom signatures for IOS IPS 5.X and I need to deploy it across a large number of routers . ATM, i don't have the CSM yet. I've tried using the latest SDM to access the routers but i can't load any signatures from it. I've tried putting the custom signatures in xml format into the sigature package IOS-S301-CLI.pkg but it seems to be encrypted during compilation. I've checked inside the CLI ,there seems to be no command to create a new signature.At the moment SDM has failed and i have only CLI access. Are there any other methods for custom signature deployment besides this ? . Thanks in advance.
- Labels:
-
IPS and IDS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-12-2007 06:17 AM
It is possible to add custom signatures using CLI for IPS beginning from version 5.1. This link should help.
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids12/cliguide/clisgdef.htm#wp1042406
