Destination NAT is not working after 9.1 Upgrade

[Alexander Moorthy]

Hi,

After the firewall upgrade , we are facing problem with Destination NAT. Can someone tell me how to write a destination NAT in 9.1 version.

Source : Any

Destination : 10.60.32.17

Need to be translated to the destination IP : 10.60.32.140

Regards

Alexander Moorthy

[pradypan]

Hi Alexander,

Can you please share your configuration for which you are observing the concern.

We can just configure a static mapping for the IP addresses on the ASA. Please find the below document for your reference.

http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/firewall/asa_91_firewall_config/nat_objects.html#pgfId-1106703

Please find below configuration example for your reference.

object network obj_10.60.32.140
 host 10.60.32.140
object network obj_10.60.32.17
 host 10.60.32.17

object network obj_10.60.32.17
 nat (inside,outside) static obj_10.60.32.140

Regards,

Pradyumna