cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
360
Views
1
Helpful
5
Replies

Device is missing from FMC backup list

sachin garg
Level 1
Level 1

FMC VM Version 7.2.5 ;  FMC standalone,

There are 6 devices on FMC under device TAB and deployment push is fine.

FTD - 7.2.5 - FTD is in cluster, transparent mode 

We are planning to upgraded the setup , at that time we came to know that device is missing from device list for the backup TAB.

 

sachingarg_0-1737422272355.png

 

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

Backups for devices in a cluster are not supported on FMC 7.2.

See Table 2 here: https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/admin/720/management-center-admin-72/tools-backup.html

That feature was added in FMC 7.3.

Reference:
https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/730/threat-defense-release-notes-73.html

As @ahollifield was implying, you would be better served by running 7.4.2.1 (current suggested release) or 7.6.

View solution in original post

5 Replies 5

I don't have an answer but why 7.2 and not 7.4 or 7.6?

sachin garg
Level 1
Level 1

SO , what can be captured and CLI as a logs to identify OR restarted as a service so that it can be checked further?

Marvin Rhoads
Hall of Fame
Hall of Fame

Backups for devices in a cluster are not supported on FMC 7.2.

See Table 2 here: https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/admin/720/management-center-admin-72/tools-backup.html

That feature was added in FMC 7.3.

Reference:
https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/release-notes/threat-defense/730/threat-defense-release-notes-73.html

As @ahollifield was implying, you would be better served by running 7.4.2.1 (current suggested release) or 7.6.

Hi @Marvin Rhoads 

Thanks for your response. We are planning to upgrade the FMC to the version 7.4.2.1, before proceeding with the upgrade, we need to take a backup of FTD in cluster.

DO we have an alternate option to take FTD backup, from FTD CLI? Please update us on the alternate options you are aware of.

Thanks,

Balaraju

 

It's not required to take a device backup prior to upgrading. Personally I never do so.

Especially for a transparent mode firewall, there is minimal configuration that would be included in a device backup (interface definitions mostly since there is not routing or IP addressing in transparent mode). The cluster bootstrap configuration is stored in the Firepower Chassis Manager and not in FMC or on the cluster members per se.

Review Cisco Networking for a $25 gift card