I'm having a heck of a time getting my 871W router to do a simple dhcp binding. I want to set up dhcp binding so I can use dhcp on the client machines, but always know the ip address so I can use monitoring software or web/ip connections to fixed addresses.
I have several Apple Mac machines and they DHCP bind just fine by putting an 01 in front of their MAC address. However, I also have 4 SqueezeBox machines that do streaming music (a product of Slim Devices). When any of the SqueezeBox Machines issue a DHCP request they do not bind. After reading the documentation for IOS and understanding that the MAC address should be preceeded by 01 to indicate an ethernet device, I tried three different approaches.
1- set the MAC address in the client-identifier to just the MAC address,
2- put an 01 in front of the MAC address,
3- in desperation, put an 06 in front of the MAC address
None of these 3 variants cause IOS to do the binding.
10.6.18.24 0004.2005.bca7 Jun 30 2006 11:47 AM Automatic
And here is a debug showing the failure to bind.
000661: Jun 28 23:41:58.520 PCTime: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0004.2005.bca7 Reason: Disassociated because sending station is leaving (or has left) BSS SSID[Airnet]
000662: Jun 28 23:42:27.820 PCTime: DHCPD: Sending notification of DISCOVER:
000663: Jun 28 23:42:27.820 PCTime: DHCPD: htype 1 chaddr 0004.2005.bca7
000664: Jun 28 23:42:27.820 PCTime: DHCPD: remote id 020a00000a0612ccf1000000
000665: Jun 28 23:42:27.820 PCTime: DHCPD: circuit id 00000000
000666: Jun 28 23:42:27.820 PCTime: DHCPD: Seeing if there is an internally specified pool class:
000667: Jun 28 23:42:27.820 PCTime: DHCPD: htype 1 chaddr 0004.2005.bca7
000668: Jun 28 23:42:27.820 PCTime: DHCPD: remote id 020a00000a0612ccf1000000
000669: Jun 28 23:42:27.820 PCTime: DHCPD: circuit id 00000000
000670: Jun 28 23:42:28.036 PCTime: DHCPD: checking for expired leases.
000671: Jun 28 23:42:28.852 PCTime: DHCPD: Sending notification of ASSIGNMENT:
000672: Jun 28 23:42:28.852 PCTime: DHCPD: address 10.6.18.24 mask 255.255.255.0
000673: Jun 28 23:42:28.852 PCTime: DHCPD: htype 1 chaddr 0004.2005.bca7
000674: Jun 28 23:42:28.852 PCTime: DHCPD: lease time remaining (secs) = 86400
Bonjour,Je cherche à acceder l'interface de management de l'ASA, depuis l'Anyconnect.Malegré que j'ai ajouté les ACLs necessaires, mais l'acces management ASA en SSH depuis le vpn nomade ne passse.Je me demande si on peut manager l'ASA en ssh ou autres pr...
I am involved in rolling out about 40 wifi networks using cisco 3602/2802 aps and cisco 5508 ISE. Our network offers a 2 step authentication with user and machine certificates as well as users needing to be in correct AD groups. The problem we have i...
ASA Site-to-Site VPN using IKEV1 Configuration Example
Configure a Site-to-Site IPSec IKEv1 Tunnel Between an ASA and a Cisco IOS Router
Site-to-Site IKEv2 Tunnel between ASA and Router Configuration Examples
Site-to-Site VPN Tunnel wit...
Dear Community, So, according to the Cisco ISE Release 2.7 Administrator Guide, it should be possible to use a remote lock/wipe on MDM-devices that connect through ISE on the network( see the screenshot in the attachment).The problem is that th...
Hi, We currently have 2 Cisco 5525X ASA's in active/standby state. We have 750 concurrent Anyconnect licenses with the below licenses:AC-PLSM-5YR-500-S & AC-PLSM-5YR-250-S. (These are expiring soon) I have asked to get these renewed by our l...