Solved: Does ASA support EEM?

hxmengmetro · ‎10-15-2010

Hi All,

I didn't see any command related to EEM in ASA. Does ASA support it? I want to catch one specific log and triger an event sent to my network management system.

Thanks.

Lou

Feras Ali · ‎05-26-2014

ASA new version 9.2.1 supports this feature, please see release notes:

http://www.cisco.com/c/en/us/td/docs/security/asa/asa92/release/notes/asarn92.html#pgfId-586890

from the link:

Embedded Event Manager (EEM)

We introduced or modified the following commands: event manager applet ,description , event syslog id , event none , event timer , event crashinfo ,action cli command , output , show running-config event manager , event manager run , show event manager , show counters protocol eem , clear configure event manager , debug event manager , debug menu eem .

View solution in original post

Federico Coto Fajardo · ‎10-15-2010

Hi,

As far as I'm aware EEM is supported on IOS only.

Here's a nice discussion:

https://cisco-support.hosted.jivesoftware.com/message/481263

Can't you accomplish what you want with Netflow?

Federico.

Feras Ali · ‎05-26-2014

ASA new version 9.2.1 supports this feature, please see release notes:

http://www.cisco.com/c/en/us/td/docs/security/asa/asa92/release/notes/asarn92.html#pgfId-586890

from the link:

Embedded Event Manager (EEM)

We introduced or modified the following commands: event manager applet ,description , event syslog id , event none , event timer , event crashinfo ,action cli command , output , show running-config event manager , event manager run , show event manager , show counters protocol eem , clear configure event manager , debug event manager , debug menu eem .