Solved: Enable port 443 to a specific host

Andre Cardoso · ‎07-20-2017

Hi, I am new on this area and i need some help with ASDM/ASA5515. I have to create on a ASDM a rule that enables port 443(https) tcp/udp to specific ip. Someone can help me?

Best regards!

Aditya Ganjoo · ‎07-20-2017

Hi,

Choose Configuration > Firewall > Access Rules, and click the Add Access Rule button.

Choose the interface to which this access list has to bound, along with the action to be performed on the traffic i.e., permit, select the source as any (subnet) and destination as the specific IP and protocol as tcp/443.

More info on this link:

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/91970-PIXASAopenblockports.html

Regards,

Aditya

Please rate helpful and mark correct answers

View solution in original post

Aditya Ganjoo · ‎07-20-2017

Hi,

Choose Configuration > Firewall > Access Rules, and click the Add Access Rule button.

Choose the interface to which this access list has to bound, along with the action to be performed on the traffic i.e., permit, select the source as any (subnet) and destination as the specific IP and protocol as tcp/443.

More info on this link:

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/91970-PIXASAopenblockports.html

Regards,

Aditya

Please rate helpful and mark correct answers

Andre Cardoso · ‎07-20-2017

Hi Aditya!

Thanks for your help! But now i wonder which one interface i must use for this rule...

Best regards!

Aditya Ganjoo · ‎07-20-2017

Hi,

If you want to access it from Internet then you need to allow it on the outside interface.

Regards,

Aditya

Please rate helpful and mark correct answers