ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

194
Views
0
Helpful
1
Replies
Highlighted
Beginner

enabling ping for dmz

I currently have an ASA 5510 unit. I have a dmz setup which house some web servers and an inside interface. The web servers contain multiple public ip addresses which I have natted and access is fine.

What is the most simple way to enable ping for my dmz from the outside. Meaning if someone outside the network pings one of the servers by its public ip address I would like it to respond to ping. Hope I explained this well any help is greatly appreciated.

Thanks,

Kevin

1 REPLY 1
Highlighted
Contributor

Re: enabling ping for dmz

Just add an acl on the outside interface allowing icmp from any to the public ip of the servers.

Sent from Cisco Technical Support iPhone App