10-08-2009 04:51 AM - edited 03-11-2019 09:24 AM
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 5.2(4)
What am I doing wrong in configuration SNMP v3 in ASA-5505 .
System image file is "disk0:/asa821-k8.bin"
Wenn I try to enter command I get error.
snmp-server user snmp_user snmp_group v3 encrypted auth md5 1CF977871 priv des 1CF977871
Error: Encrypted passwords must be in hex format
Solved! Go to Solution.
10-08-2009 05:33 AM
Remove the encrypted keyword. This is telling the ASA you will be entering encrypted passwords (this does not remove SNMP encryption).
Your command should be-
snmp-server user snmp_user snmp_group v3 auth md5 1CF977871 priv des 1CF977871
In the config you should see it converted to HEX.
Hope that helps.
10-08-2009 05:33 AM
Remove the encrypted keyword. This is telling the ASA you will be entering encrypted passwords (this does not remove SNMP encryption).
Your command should be-
snmp-server user snmp_user snmp_group v3 auth md5 1CF977871 priv des 1CF977871
In the config you should see it converted to HEX.
Hope that helps.
10-08-2009 05:42 AM
Thank you, it works !
09-06-2023 03:40 PM
Answer still valid from 2009 ! lol ! great community
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide