11-05-2003 05:08 AM - edited 02-20-2020 11:04 PM
Hi,
I have suddenly started to get the following error message when trying to run PDM from my PC to our PIX 515e Firewall.
'Your PIX image has a version number of unknown. This version of PDM will only interoperate with versions that start with 6.0 or 6.1. Please update your PIX image so that they are compatible.'
This always worked before but now it does not. No changes to the firewall have been made so what has happened? Has my PIX become corrupted?
Many thanks for any suggestions.
Robin.
11-06-2003 01:28 PM
Hi,
What is the current version on the PIX? Could you please share "show version"
Thanks
Nadeem
11-10-2003 05:01 AM
Hi Nadeem,
The current PIX version shows as 6.1(4)
Any ideas.
Thanks,
Robin
11-10-2003 01:17 PM
There are two pieces of software in PIX. One is the Operating Systems, the other is the PDM. You always need the O/S but the PDM is optional. The PDM software is for the GUI. If you do not intend to manage the firewall using the GUI, ie Web browser, you do not even need to install it.
The error message you have means the PDM software is not comparable with the O/S. Since you are running O/S version 6.X , you must install/upgrade the pdm version 2.1 It is available for download from COO.
Hope it has answered your question.
11-12-2003 03:14 AM
Thanks for your reply.
This does confuse me slightly. I have not upgraded the PIX OS software and the PDM worked fine two weeks ago. What has changed to make the PDM software out of sync with the OS?
I have not changed the OS or the PDM so am really confused.
Robin.
11-18-2003 06:54 PM
I have seen the same thing in my environment. PDM was working fine then just stopped. I tried reinstalling PDM without any luck. I am running PIX 6.3(3) and PDM 3.01.
11-20-2003 12:39 PM
Hi
If nothing has been changed on the PIX Firewall, could you check if you did a Windows/Internet Explorer update(assuming your OS to be Windows) on your PC or laptop recently?
This could stop you accessing PDM becuase of the removal of Java VM support on MS Internet Explorer on its latest versions.
Also you can try 'Delete Files' on the 'General' tab of the 'Tools-Internet options' of Internet Explorer before trying to connect to the PDM.
Anoop K Narayanan
NICBM Kuwait
11-27-2003 07:15 AM
Well, I have tried all of the above. Nothing works.
Looks like I am going to have to go back to the command line interface!!!
robin.
11-28-2003 10:10 PM
Hi
If you are using MS-Internet Explorer version 5.0 or above, you need to install MS-Virtual Java machine separately.
Download the MS-JVM version 5.00.3805 from this link, install, delete all cookies/files and try. This should work. Try, best of luck.
http://home.wanadoo.nl/jheroen/VM/#ms
Regards
Anoop K Narayanan
12-05-2003 06:36 AM
I have tried this as well but no luck!!
I used PDM a few weeks back and have not changed the system since then but it just refuses to do anything now!
I am stumped with this one.
Robin.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide