filtering RIP routes into ospf

[mulhollandm]

folks

i'm doing a bit of lab work and tinkering with gns and route distribution

i'm trying to find the best way to filter routes (on an ASA) in the rip database so that only specific routes are distributed into a particular ospf process - at the minute when i use the redistribute rip subnet command in router ospf the entire RIP database is redistributed

i'm assuming a route map is the best method with an acl but i'm curious if anyone can point me to some specific configuration examples and advise on the best approach

thanks to anyone taking the time to read this or to contribute

greatly appreciated

[andrew.prince · Accepted solution]

read the below link

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/route_maps.html

Sent from Cisco Technical Support iPad App

[mulhollandm]

andrew

many thanks for the reply

i'll have a look at the config examples in the link and test it

thanks for your reply

[andrew.prince]

Np -glad to help.

[mulhollandm]

andrew

got it sorted

i was using an extend acl rather than a simple standard list

thanks for your help

gratefully appreciated

[andrew.prince]

Good work - no problem, glad to help.