Hello Fellow Mates,
One of my client has a fingerprint device configured in his environment. There is the internet router then there is the switch and then some pcs and the device connected. All are accessible through their headoffice as well, but now when the firewall is implemented between the internet router and the switch. Everything is working fine. Everything is accessible from the headoffice except the fingerprint device. internally its fine but cant be accessed from out. ACL allows ip any any. so no ip or port issue. went through the below link and have done everything as well but not luck. The default gateway for the fingerprint device is the Internet router, couldnt give it as the firewall because its in transparent mode.
http://www.midextimeandattendance.com/support/how-to/fingerprint-reader/connect-remotely/
Regards,
-Mateen
