Firepower 1010 - PPPoE on VLAN interface

[qualxarnu]

Hello All,

Does anyone can advice if on Firewall Firepower 1010 there is a possibility to configure VLAN interface and under this VLAN interface configure PPPoE connection?
I recall that it was possible on the ASA5506-X for example, but I'm not sure if it's possible on it's successor.

Thanks!

[Cristian Matei]

Hi,

    You'll have to use FMC in order to configure PPPoE, not FDM. In case, you don't have support for PPPoE to a VLAN interface (however i don't see any reason, i didn't see it documented, but cannot 100% confirm as did not touch with a 1010), you have support for PPPoE for routed port, so you can still use PPPoE.

Regards,

Cristian Matei.

[qualxarnu]

Hi,
Thanks for your reply.
The reason is that IPS delivering the internet also provides few other services. All services have own VLAN thus there is a need to have VLAN interface configured as an outside interface and there PPPoE.
But if it's not possible without FMC, then it's a shame. I will have to search for a different firewall then .