About Cristian Matei

Cristian Matei · 12-18-2024

Hi, Yes, on the switch. Best, Cristian.

Cristian Matei · 12-18-2024

Hi, Disable RADIUS interim accounting or set it to a higher value, as well as configure ISE suppression under "Administration -> System -> Settings -> Protocols -> RADIUS". Check this document as well, for further reference: https://community....

Cristian Matei · 12-15-2024

Hi, You might need to replace CMOS battery. Before that, check this thread, perform all tests to see if there are any faults, and/or change the jumper settings: https://community.cisco.com/t5/network-security/pix-booting-problem/td-p/487591 Regar...

Cristian Matei · 12-03-2024

Hi, First, i'd say is important to clarify LSA Type 1 vs. LSA Type2, when we speak about OSPFv2. Each router will always send one LSA Type 1 per area, advertising all of its links, link type, associated prefix and cost within that area. Additiona...

Cristian Matei · 11-01-2024

Hi, When you say you have it working, you mean it works when you don't have the Cisco switch in the transit path, right? Please confirm. Now, when you have multiple layer 3 hops between sender and receiver, making it work without PIM (assumin...

Member Since	‎11-15-2006 02:26 AM
Date Last Visited	‎12-27-2024 10:51 PM
Posts	1,453
Total Helpful Votes Received	1259

User Statistics

User Activity

Re: 12929 NAS sends RADIUS accounting update messages too frequently

Re: 12929 NAS sends RADIUS accounting update messages too frequently

Re: Cisco PIX 525 Not Booting

Re: OSPF Lsa Type 2

Re: Cisco Static Multicast routing on layer 3 switch