FIREPOWER 1010 ROUTING

[RAZIZUDDIN]

HI ALL,

I have bought the firepower 1010 to act as gateway for my thirdparty item going to be connect with our network

our network based are 10.13.x.x and the outside are 192.168.20.x and 192.168.4.x

can the firepower do it using FDM. can we have the example how to do it

Thanks and Best REgards

Razizuddin

[Mohammed al Baqari]

Yes, FDM can configure FTD to do this.

**** please remember to rate useful posts

[Marvin Rhoads]

There are numerous ways to accomplish this. The simplest would be static routes and not using NAT. But your requirements  for network traffic flow, addressing and security etc. would dictate which approach is best for you.

[RAZIZUDDIN]

 This is my setup, and my FDM is as the gateway. how can i do that. can you explain how i want to do it. can you provide me some sample

@Marvin Rhoads  and @Mohammed al Baqari 

[RAZIZUDDIN]

Now i can already ping to my end to end host but weird I can't ping from outside host can't ping the inside interface/gateway and vice versa

[Marvin Rhoads]

It is by design that you cannot ping the inside interface from outside or vice versa. That won't work for FTD or ASA firewall.