cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
829
Views
0
Helpful
1
Replies

Firepower 2130 will not register with management console.

I am trying to get a couple of Firepower 2130s registered with the management console.  

First, I added a pre-shared key:

> configure manager add co-fpwr01.lereta.net <alpha-numeric key>

When I tried to add the device it fails and, to top it off, the web interface on the 2130 now returns an error 503.

I am guessing that somewhere along the line I crashed a process on the 2130 and I cannot get it back.  Even a reboot didn't help.

I hope this is fixable.

1 Accepted Solution

Accepted Solutions

I finally figured it out.  The OS on the firepower management console was 6.2.0 but the 2130a were 6.2.1.  Apparently these are not compatible.  I update the FMC to 6.2.2 and both 2130s registered.

View solution in original post

1 Reply 1

I finally figured it out.  The OS on the firepower management console was 6.2.0 but the 2130a were 6.2.1.  Apparently these are not compatible.  I update the FMC to 6.2.2 and both 2130s registered.

Review Cisco Networking for a $25 gift card