01-05-2016 11:05 PM - edited 02-21-2020 05:40 AM
i have a ASA-5512x with firepower and firesight. but unable to add firepower on firesight. can ssh firepower from firesight.
01-06-2016 02:09 AM
Probably you did something wrong ...
What did you exactly do (both on FP and on FS) and what are the error messages?
01-06-2016 04:33 AM
i got the below message ;
01-06-2016 04:38 AM
I have firesight ;
|Software Version||5.4.0 (build 763)|
|OS||Sourcefire Linux OS 5.4.0 (build126)|
Sourcefire Linux OS v5.4.0 (build 127)
Sourcefire ASA5512 v5.4.0 (build 764)
01-06-2016 04:44 AM
I would first update FireSight to the newest 5.4.x pactchlevel.
Is the output of "show managers" on FP matching your setup?
01-06-2016 04:47 AM
Host : 10.203.5.122
Registration Key : cisco
Registration : pending
RPC Status :
same on firesight
01-07-2016 05:22 AM
01-07-2016 05:49 AM
How long did you wait? And how did it fail exactly?
01-07-2016 06:01 AM
it took around 9 to 12 min to reach 19%, retry few time and then got the message of failed.
02-16-2016 07:45 AM
I have the same problem when I try to add ASA5506 Firepower to FSM Virtual Appliance on version 6.0.0 (build 1005)
I tried with the version FSM 5.4.0 when I try to patch any version 5.4.1 or 126.96.36.199 it's fails in 7%
Any idea to resolve this problem? I reimage twice my ASA but no way
10-02-2017 07:04 AM
Did anyone find a solution, I'm experiencing the same issue while adding the firepower module to Firesight.
10-02-2017 07:54 AM
Please tell us the details of your issue or start a new discussion.
There are several different issues mentioned in this thread already.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: