05-11-2018 03:12 AM - edited 02-21-2020 07:45 AM
After the Firepower Management Center and the sensors were upgraded to 6.2.3, there is an increase of errors with scheduled deployments.
As a workaround, we must do a "Force Deploy" on every sensor that has failed.
Can anyone advise on this?
Solved! Go to Solution.
05-29-2018 04:34 AM
Hi
If the scheduled deployment happens after intrusion rule update, There are 2 possible bugs for this issue.
CSCvj33202 and CSCvj48931.
You can try the workaround of disabling firepower recommendation in the intrusion policy and then test it.
Hope it helps,
Yogesh
05-28-2018 08:25 AM
Moved thread to Firepower forum.
I'd recommend opening a TAC case on this issue.
05-29-2018 04:34 AM
Hi
If the scheduled deployment happens after intrusion rule update, There are 2 possible bugs for this issue.
CSCvj33202 and CSCvj48931.
You can try the workaround of disabling firepower recommendation in the intrusion policy and then test it.
Hope it helps,
Yogesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide