FMC disable protocol inspection flex-config (not globally)

[Istvanvirag]

Hello,

We want to disable esmtp inspection for specific traffic only, but not globally.

We want to convert this FDM configuration to FMC flex-config if possible:

access-list MATCH_ACL permit ip host 192.168.1.55 host 198.51.100.1
class-map MATCH_CMAP
match access-list MATCH_ACL
policy-map PPTP_POLICY
class MATCH_CMAP
  no  inspect esmtp
service-policy PPTP_POLICY interface inside

[MHM Cisco World]

https://www.cisco.com/c/en/us/td/docs/security/firepower/660/fdm/fptd-fdm-config-guide-660/fptd-fdm-advanced.html#concept_53C22C306B57480D99DB905E90D5FDC9

check this link, and Yes you can use flexconfig to disable inspection for specific traffic 
MHM