cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
680
Views
0
Helpful
0
Replies

FMCv on-prem FTDv Azure registration issue

mateens
Level 1
Level 1

FMC starts registration then displays Discovery failed and then unregisters the FTD saying - Unable to get status message.

On FTD i see registration pending then complete before it gets unregistered. Both communicating on port 8305. 

 

I see the following logs before FMC unregisters the FTD.

 

on FTD i see:

ACTQ: 08-13 13:45:27 pid=15605 Remote heartbeat task processing failed on 172.30.7.1: Appliance is set to ignore, ignore heartbeat from 4eb60038-c462-11eb-a04d-m3017b472bc8 at /ngfwPERLLIB/SF/Synchronize/VerticalSync.pm line 462.
SERR: 08-13 13:45:27 ActionQueueScrape[3300]: Remote heartbeat task processing failed on 172.30.7.1: Appliance is set to ignore, ignore heartbeat from eb60038-c462-11eb-a04d-m3017b472bc8 at /ngfwPERLLIB/SF/Synchronize/VerticalSync.pm line 462.

 

 on FMC i see:

SERR: 08-13 13:37:08 ActionQueueScrape[27936]: REMOTE WARNING FROM '10.240.1.6': Platform_info file not present.
USMS: 08-13 13:37:08 "hostName": "10.240.1.6",
USMS: 08-13 13:37:08 "mgmtIpAddress": "10.240.1.6",
ACTQ: 08-13 13:37:08 pid=10302 Applying Custom FP remotely to 10.240.1.6 at PERLLIB/SF/RNA/CustomFP.pm line 1803.
ACTQ: 08-13 13:37:08 pid=8270 'displayName' => '10.240.1.6'
USMS: 08-13 13:37:08 "hostName": "10.240.1.6",
USMS: 08-13 13:37:08 "mgmtIpAddress": "10.240.1.6",
SERR: 08-13 13:37:08 ActionQueueScrape[27936]: Applying Custom FP remotely to 10.240.1.6 at PERLLIB/SF/RNA/CustomFP.pm line 1803.
SERR: 08-13 13:37:08 ActionQueueScrape[27936]: 'displayName' => '10.240.1.6'
SERR: 08-13 13:37:08 ActionQueueScrape[27936]: END TASK || 4c4bba94-fc4b-11eb-ac6f-87cd8c764v65 || Registration || Communication with 10.240.1.6 has been established, discovery in progress || 138

 

0 Replies 0
Review Cisco Networking for a $25 gift card