05-19-2016 11:10 PM - edited 03-10-2019 06:37 AM
I have to relocate a FP7010, and I am trying to find the mounting kit instructions, all the documentation states read the instructions that come with the mounting kit. Can anybody supply me with a link to these instructions online?
thanks
05-20-2016 10:29 AM
Hello Richard,
This info was available with our legacy devices.
Anyway I could get one for you similar with 8000 series appliance.
Refer the following link :-
http://www.cisco.com/c/en/us/support/docs/security/firepower-8000-series-appliances/118945-technote-firepower-00.html
The FP7010, FP7020, FP7030 units are a small form factor – they are not accompanied by rail kits. The FP7000-RACK= holds two units side by side, and if it is needed, it must be ordered separately. Formerly known as 3D-70XX-RACK-KIT, The Cisco PID is FP7000-RACK=
Kindly rate or endorse if this answer helps you.
Regards
Jetsy
05-20-2016 02:01 PM
Sorry the Mounting kit is not the same as in the link you sent. I need instructions for the 3D-70XX-RACK-KIT,
regards
05-23-2016 03:48 AM
Hello Richard ,
Let me contact few internal guys.
I will let you know shortly if there is anything that I can help you with.
Regards
Jetsy
05-23-2016 03:59 PM
Jetsy,
Actually when it came to do the relocation, it was quite easy to move( not like some rail kits),
so all done.
thanks for your help
regards
05-30-2016 02:07 AM
Hello Richard,
There was no external article available for 7000 series device yet.
I have just made one external so that you can refer next time..
https://www.cisco.com/c/en/us/support/docs/security/firepower-7000-series-appliances/200488-Firepower-7000-Series-Appliance-Rail-Kit.html
Rate if answer helps you.
Regards
jetsy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide