frequent asa vpn ssl handshake & terminate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-06-2008 07:33 AM - edited 03-11-2019 05:40 AM
Hi all
I've recently noticed a lot of the following on our asa used for remote vpn...
starting ssl handshake
ssl client external {ip address} requesting resume previous session
device completed ssl handshake with client external
ssl session with client external terminated
It continues to happen over the whole day, with a few minutes of connection time, always doing a tcp reset-o with 529 bytes sent each time.
Is it simply a user with a bad internet connection outside ?
- Labels:
-
NGFW Firewalls
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-12-2008 07:17 AM
you must have an address pool configured as your ssl clients need IP addreses.The error you have recieved states that there is no ip address pool cionfigured for the ssl clients.
Refer to the SSL client configuration guide present in the foolowing URL for more related information:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml
