FTD 2110

[ssan239]

Hi Team,

We are using the FTD 2110 as ASA using the ASA image. Now we need to upgrade the FTD with the ASA image itself. 

May i know how to upgrade? As we do not have ASDM access to these devices? How to upload the image? Can we use TFTP? If yes, may i know how to do that where to save the image? How to boot it with the new image?

Regards,

Sanjay S

[Sheraz.Salim]

@ssan239 what is the software code you running to FTD ASA code?

check this document the software matrix for asa code on FTD box

https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html

Here is the process with TFTP/scp how to upgrade the code of ASA in FTD

https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/asa-appliance-asav.html

[MHM Cisco World]

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/200107-ASA-9-x-Upgrade-a-Software-Image-using.html

Hope this help you

MHM

[Marvin Rhoads]

Details for upgrading ASA image on a Firepower 2100 series appliance can be found here:

https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/asa-appliance-asav.html#topic_gjl_zrj_cjb

[ssan239]

Thanks All,

May i know if the 2100 running ASA image can login to ASDM as well?

Currently we have below,

Cisco Adaptive Security Appliance Software Version 9.16(4)
SSP Operating System Version 2.10(1.217)
Device Manager Version 7.18(1)152

Sanjay S

[Marvin Rhoads · Accepted solution]

@ssan239 yes you can access ASDM, assuming somebody has not deleted the ASDM image, that they are allowed via configuration of http and AAA etc.