FTD-Anyconnect Start Before Logon Client issue

[sami.poles]

Hi dears,

I hope you are looking well...

I have a small issue with start before login which is when I finish the installation the start before login icon appears in corner when I shutdown the PC and when I sign out but not appears when I lock out the PC so is there any solution to overcome this matter?

please check attachment.and check the small arrow position.

Thanks in advance

[Marvin Rhoads]

That's the expected behavior. When the PC is locked, the user is still logged in so Start BEFORE Login module with the associated icon on the login screen does not apply.

I see the same on my lab PC with SBL module installed and active.

[sami.poles]

Hi @Marvin Rhoads 

   many thanks for your replay.

but suppose the user disconnect the any-connect session and then lockout the laptop he will then need to restart the laptop and then logon again, this what I need to find a solution to pass this issue.

B.R,

[Marvin Rhoads]

You could combine SBL with Always-On.

Here's the guide for setting up the AnyConnect VPN Always-On feature:

https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect410/administration/guide/b-anyconnect-admin-guide-4-10/configure_vpn.html#topic_BD02A53E0A714E23A56850698C830A6C

[sami.poles]

@Marvin Rhoads 

!!!

I don't thing this will solve the issue.