Community,I am working with TAC on an issue with my FMC's. In the meantime while the issue is being resolved by TAC my FMC HA pair is in a split-brain situation due to the sync being paused. TAC is stating that I can still make and push changes from ...
First VPN config. Missing something simple. ERROR: Address X.X.X.X overlaps with outside interface address.ERROR: NAT Policy is not downloaded.Firepower 2100 series using FDM for configuration. I have configured the VPN for inside network object X.X....
Hi,I would like to ask about PLR for firepower. My firepower don't have internet so i run with evaluation license.Now I want to change to PLR.I knew how to switch to PLR from registered the device using smart licensing.But i cannot find how to switch...
Hello All. I have an FTD running 6.6.4. - the current interface config:1. Inside Zone - Interface 10.10.10.1 (network 10.10.0.0)2. Outside Zone - Interface 10.20.20.248 (network 10.20.20.0)3. Route - any-ipv4, outside, global, 10.20.20.1, false, 1 Ne...
HI,I have Cisco Firepower FTD 1010, and due to the fact that we need high available network, i have question if i can order another FTD 1010, and configure both devises with High Availability Active and Standby.Now i have one FTD1010 connected to 3 C...
Hi Guys,Hope all are okay.I am tasked to migrate our firewall from ASA to a non-Cisco firewall and it includes firewall clean up. I would to ask in an ASA standpoint, what are the strategies for the engineer to determine duplicates and non-used polic...
Hi all I had NAT question. As can seen on the attached topology, it is mandate to do NAT policy on both firewall. (Due to some mandate policy setup)I would like to askquestion 1: As bubble 1 showing, how traffic from DMZ can SSH to the real machine? ...
Dear all, I'm writing you regarding a big headache I have with a active/passive ASA 5510 cluster. Both have been updated to their latest version ( 9.1.7 ). Since 4/5 months now, we have complaints from users as their IP phone reboot nearly 5 to 6 tim...
I have a small test topology with LAN and DMZ network. My LAN network have ospf network and my DMZ have Rip network. I have redistribute my static route (pointing to internet) into Rip and OSPF, I can see the redistributed routed into RIP but not in ...
I have a Firepower 2100 (Firewall A) with logical ASA image with a default route pointed towards management interface..i have 2 more subinterface on the same firewall..one is Inside and the other points towards Firewall B.. i want to integrate Firewa...
I am considering some replacement equipment for some End of Life Firewalls. The appliance I am interested in is the Cisco Firepower 4115 Next Gen Fire Wall. In the quote statement, the vendor included the part FPR4k-SSD400- with a description: Fire...
We have FTD-A as a VPN firewall that authenticates remote users against LDAP and assigns IP addresses. What we are trying to achieve is a user-based policy applied on FTD-B, but we are having problems identifying users when they are connected to VPN....
Hello, I'm trying to add a backup ISP to my Firepower firewall managed through FMC. I have options for Frequency, Timeout, and Threshold, but I don't see any options in either the SLA or the Tracked route for a delay. How would I set the amount of ti...
Hello Experts, Existing FPR 9300 has below modules:- SM24 with ASA SW and on-board 8 x 10GE optical ports. Can we add 2 x SM56 and 2 x FPR9K-NM-4X40G to same FPR 9300 chassis? Will it support that much backplane bandwidth with 40G modules? How much f...
Dears,I'd like to confirm about FMCv firmware upgrade time. I directly upgraded from FMC existing version 6.4.0.9 to targeted one 6.6.4. After taking 7 hrs continuously included existing time from maintenance mode, this upgrade finished successfully....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-10-2026 12:34 PM | ||
| 11-06-2026 12:20 AM | ||
| 09-22-2026 04:13 PM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM |
| User | Count |
|---|---|
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
