05-03-2007 12:42 PM - edited 03-11-2019 03:09 AM
Ok, I am trying to have an FTP server (eFTP if it matters) in my web dmz. Basically have the server with a private performing NAT to a public address, no big deal, I have enabled the appropriate port for forwarding (21) - and I can set what other ports my server uses for data transfer etc, however I CANNOT get this thing to work. Anyone have a good resource to look at? I know the passive - active mode comes into play but I havn't found any good docs. I have enable ALL ip traffic from the client ip address to the server and still nothing - I must be missing something!
Thanks, elliott
05-03-2007 08:18 PM
Do you have an inspect ftp in your config.You can add that line if you using 7.0 and above and see how it goes.
05-04-2007 05:02 AM
I am running 7.2(2) - I will try the inspect option.
Thanks, Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide