cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
431
Views
0
Helpful
1
Replies

FWSM 3.1.3 question

wpetherbridge
Level 1
Level 1

Hi,

we are receiving hundreds of the following entries in our syslog. I have checked the timeouts and all seems fine. All timeouts happens at 20 seconds.

%FWSM-6-302014: Teardown TCP connection 145769459373785053 for outside:<ip add>/3873 to inside:<ip add>/135 duration 0:00:20 bytes 328 Conn-timeout

Any ideas welcome.

Thanks.

1 Reply 1

beth-martin
Level 5
Level 5

The reason you saw the message could be because the TCP connection was deleted. The reason for that is it's forced termination. This could happen in heavy traffic load enverionment or routing issue in the network like missing route for the hosts behind the FWSM.

Review Cisco Networking for a $25 gift card