cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
392
Views
0
Helpful
1
Replies

FWSM: DHCPD

colmgrier
Level 1
Level 1

DHCPD is not configuring on failover FWSM. All other config is syncing between both FWSM.

dhcpd address 10.27.0.10-10.27.1.9 INSIDE

dhcpd lease 3600

dhcpd ping_timeout 50

dhcpd option 150 ip 10.27.2.10 10.27.2.11

dhcpd enable INSIDE

FWSM Firewall Version 4.0(7)

Device Manager Version 6.1(5)F

Please advise.

1 Reply 1

Herbert Baerten
Cisco Employee
Cisco Employee

Have you tried a "write standby" on the active unit or reloading the standby?

If neither helps, check "show console-output" on the standby.

If that does not provide any clue, open a TAC case as it sounds like a bug.

Review Cisco Networking for a $25 gift card