H,
Please find the attached screen shot of error.
------------------ show module ------------------
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 1000mb SFP WS-X6748-SFP
2 6 Firewall Module WS-SVC-FWM-1
3 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX
5 2 Supervisor Engine 720 (Active) WS-SUP720-3B
6 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX
8 48 CEF720 48 port 1000mb SFP WS-X6748-SFP
9 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
Mod Hw Fw Sw Status
--- ------ ------------ ------------ -------
1 1.5 12.2(14r)S5 12.2(18)SXF1 Ok
2 4.0 7.2(1) 3.2(17) Ok
3 1.1 7.2(1) 8.5(0.46)RFW Ok
5 4.5 8.1(3) 12.2(18)SXF1 Ok
6 7.2 7.2(1) 8.5(0.46)RFW Ok
8 2.4 12.2(18r)S1 12.2(18)SXF1 Ok
9 4.5 12.2(18r)S1 12.2(18)SXF1 Ok
Unable to create interface in context due to I am planning to upgrade IOS ver of FWSM
From 3.2(17) to 4.X
Is there any compatibility issue to upgarde to ver 4.x and need to upgarde IOS ver of switch as well ?
Plz help me on this...Thx in advance