Getting mY PIX Current

[stownsend]

I have a PIX 515 that was never put into production. I want to get it curent before I start using it in the Lab. What do I need to get/do to it.

Here is its Info:

Cisco Secure PIX Firewall Version 5.3(1)

Compiled on Tue 05-Dec-00 17:51 by morlee

Hardware: PIX-515, 32 MB RAM, CPU Pentium 200 MHz

Flash i28F640J5 @ 0x300, 16MB

BIOS Flash AT29C257 @ 0xfffd8000, 32KB

0: ethernet0:

1: ethernet1:

Licensed Features:

Failover: Disabled

VPN-DES: Disabled

VPN-3DES: Disabled

Maximum Interfaces: 3

Cut-through Proxy: Enabled

Guards: Enabled

Websense: Enabled

Throughput: Unlimited

ISAKMP peers: Unlimited

Thanks!

Scott<-

[rsnider]

Check the following link. It has detailed instuctions on how to do the upgrade.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_60/config/config.htm

[David White]

Hi Scott,

PIX version 6.2(1) is the most current release of PIX software. It has many additional features over previous versions. You can follow the upgrade procedure here to upgrade your PIX:

http://www.cisco.com/warp/public/110/upgrade.shtml

Also, you may consider installing PDM version 2.0 to manage the PIX through a web based GUI if you wish.

Hope that helps,

David.