H.323 timeout

[RRFS578780]

After a disconnection occurred in a video conference, troubleshooting was initiated to identify the root cause. After log analysis, we found that the call was disconnected by H.323 timeout.

However, I would like to know if you have any ASA parsing or configuration to create an exception regarding possible H323 traffic timeout:

[Sheraz.Salim]

Configuring H.323 and H.225 Timeout Values

To configure the idle time after which an H.225 signalling connection is closed, use the timeout h225 command. The default for H.225 timeout is one hour.

To configure the idle time after which an H.323 control connection is closed, use the timeout h323 command. The default is five minutes.

https://www.cisco.com/c/en/us/td/docs/security/asa/asa82/configuration/guide/config/inspect_voicevideo.html#wp1229352