08-03-2012 12:15 AM - edited 02-21-2020 04:42 AM
I'm using Pix 501 with firmware: Version 6.3(3)
I have problem with Pix 501:
+ transfer rate data between interface outside and inside very slow, even between 2 interface inside.
+ I have test file transfer between 2 PC connect via interface inside.
+ Results transfer 1 file 1MB with total time 60s
I don't upgrade software current from 6.3(3) to 6.3(5) via TFTP. It's error Please see attach file
Please help me to solve this problem.
Thanks for support.
10-25-2012 02:48 PM
Hello Minh Nguyen Viet,
Thank you for your question.
However, the Small Business Support Community is limited to Cisco Small Business Products and the PIX501 is considered as an Enterprise class device.
In the next link you will find the area that may help you further with your question.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/
Best regards,
Diego Rodriguez
Cisco Small Business Community Engineer.
10-25-2012 11:06 PM
Hi Minh,
I have moved your question into the correct area within the Cisco Support Communities.
Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide