06-25-2010 01:46 AM - edited 03-11-2019 11:03 AM
Hi,
i need help for upgrade ASDM and Software of a FWSM.
My running software is FWSM Version 3.2(5) and i want to upgrade to last release.
ALso i want to upgrade ASDM to last release ASDM 6.2F.
Can some one explain me the exact procedure to upgrade the FWSM.
thanks a lot.
Solved! Go to Solution.
06-25-2010 03:57 AM
Yes, sir. That's correct.
You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.
06-25-2010 02:18 AM
It's all described in configuration guide.
http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/swcnfg_f.html
06-25-2010 02:37 AM
Thanks a lot,
the section that i must read is "Installing Application Software from the FWSM CLI" , correct?
But in ASA you download the image in DISK0:,here in the flashcard?
In ASA you must use command boot to specify witch ASDM or Software you want to load on boot, here i not specify nothing?
thanks a lot best regards.
06-25-2010 03:53 AM
FWSM unlike ASA does not have the "boot system ..." CLI.
It can only boot from flash:image
Marcin
06-25-2010 03:54 AM
So i need only to download the asdm and software version to falsh and that it......
correct ?
Thanks a lot.
06-25-2010 03:57 AM
Yes, sir. That's correct.
You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.
06-25-2010 04:01 AM
Thanks a lot you are perfect.
Best regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide