cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
756
Views
0
Helpful
16
Replies

Hi Experts

habibnoubissi
Level 1
Level 1

please is it possible to configure 2 default route in a router?

16 Replies 16

Hi Habib,

You can control internet access in may ways. If you have static IP address for internet access, then I would suggest adding and acl in inside of router R2.

In the below example, the acl internet_users will control internet access.

!

ip access-list extended internet_users

permit ip host 172.22.10.1 any

permit ip 172.22.15.16 0.0.0.7 any

!

interface fastethernet 0/1

description <<<<< Inside Network >>>>>

ip access-group internet_users in

!

If you are using dynamic IP address assignment and if you have Cisco Secure ACS, then use proxy authentication on Internet Router R2.

Hi Roshan and Jon

I did approximately what u ask to do and it works, now all my branches go to the internet through R2 thank you very much for your help.

regards

Review Cisco Networking for a $25 gift card