Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I have configured VPN and want to use internet via same link. I can ping any public ip from router, but can't ping (get many loses) during ping from inside host.I have attached my config file..I hope you guys will help me finding my configura...
I followed instruction from cisco web site to change LAP1231G to autonomous mode without controller. I get follwing error message when AP tries to connect local tftp server.image_recovery: Download default IOS tar image tftp://255.255.255.255/c1200-k...
Not easy to grt that directly from IPS. Send alert logs to Splunk and create Splunk query to detect low volume attacks.Sent from Cisco Technical Support iPad App
Hi,You have to configure LDAP Server in your ASA and LDAP attribute is mapped with Cisco Attribute.(LDAP memberOf is mappe to GroupPolicy)Then you have to configure LDAP Attribute mappinghttp://www.cisco.com/en/US/products/ps6120/products_configurati...
Hi Mike,A little edit on your configuration. Since, you have single public IP and multiple inside web-Servers, the inside web Servers run on port 80. The mapping is between single PublicIP:Port to Multiple PrivateIP:www ports158.65.411.12:80->10.1.1....
Hi,IF you are trying to access AIP-SSM for the first time from ASA, then try using command line.ASA5520 and AIP-SSM are two different unit and each has its own credentials. The default username password for AIP-SSM is cisco/cisco. AIP-SSM will ask yo...
