Dear All,
We have a 6509 core with the below modules running for a long time and the utilization used to be always 10 to 13 percent
checking with the supplier it was told to us that due to the firewall modue we have and its normal
Now 2 days back i noticed the utilzation had jumped to 90 %
and now it happened again
I see that on runnung proc cpu
16407 56.1% 56.5% 55.9% ios-base
16430 35.3% 35.2% 33.9% iprouting.iosproc
Now I really apprecite if someone could advise me as to how I could trouble shoot this problem
thnks in advance
the modules present
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 6 Firewall Module WS-SVC-FWM-1 SAD140901XA
3 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC SAL0707D47C
5 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL09295WXM
6 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SAL1310LB9G
8 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAD091902RJ
9 48 48-port 10/100 mb RJ45 WS-X6148-RJ-45 SAL0710052E
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 68ef.bd30.be98 to 68ef.bd30.be9f 4.5 7.2(1) 4.1(3) Ok
3 000b.fdd6.a7e8 to 000b.fdd6.a7f7 2.4 5.4(2) 8.7(0.22)BUB Ok
5 0014.f231.7ab0 to 0014.f231.7abf 4.2 7.2(1) 8.7(0.22)BUB Ok
6 001f.6cbd.3760 to 001f.6cbd.3767 3.1 8.5(3) 12.2(33)SXH4 Ok
8 0013.8051.0088 to 0013.8051.00b7 2.2 12.2(14r)S5 12.2(33)SXH4 Ok
9 000c.30a3.f6c0 to 000c.30a3.f6ef 1.1 5.4(2) 8.7(0.22)BUB Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
6 Policy Feature Card 3 VS-F6K-PFC3C SAL1309L1SS 1.0 Ok
6 MSFC3 Daughterboard VS-F6K-MSFC3 SAL1307JSSB 1.1 Ok
8 Centralized Forwarding Card WS-F6700-CFC SAL1031X5MB 3.0 Ok
Mod Online Diag Status
---- -------------------
1 Pass
3 Pass
5 Pass
6 Pass
8 Pass
9 Pass
regards
simon
