Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,
I have recently installed the iso version of cisco prime infrastructure version 3.1
i earlier had cisco mars running and the iso was downloaded by the vendor authorize partner.
now everything is working fine but i need to license the produ...
Dear All,I have a 2 cisco core (cisco WS-C6509-E (R7000) processor) and been working for quite sometime.they are conneted with HSRP with active standby config with a 10 g module for redundancyjust today I see that the cpu utilization went to about 50...
Dear All,I am sorry for this silly question we need to relocate our core switch 6500 with sup 720 to another bldgwhat is the command to gracefully shut it downI mean power offI was told one can just switch off the powerbut i just wanna be carefulappr...
Dear All,We have a 6509 core with the below modules running for a long time and the utilization used to be always 10 to 13 percentchecking with the supplier it was told to us that due to the firewall modue we have and its normalNow 2 days back i noti...
Dear All,We have a 6509 core with the below modules running for a long time and the utilization used to be always 10 to 13 percentchecking with the supplier it was told to us that due to the firewall modue we have and its normalNow 2 days back i noti...
Thanks a lot for your reply
apprecite
by the way if someone can advice me as ai said earlier how do i go about licensing Cisco prime and i already have before cisco LMS spplicance and there is a free upgrade for lms to cisco prime
apprecite your advi...
Dear amu,First of all you dont need to say sorry for the delay..u r the one who was so helpful and really so grateful with your wise replyand also there was no delayactually after the link which you had mentioned trouble shootin was more ea=sierfirst...
Dear Aru,As per you advice and te link you mentioned I did manage to tract the inface on the coreits a gibex 1gb fibre port connected to a 48 port access switchso i did shut the port and the utilization went to normal like a charmbut i am just stuck ...
Dear Aru,Really grateful and apprecite your immedite wise replyby the way here below isa part of the sh netdr capure------------ dump of incoming inband packet -------interface Vl12, routine mistral_process_rx_packet_inlin, timestamp 14:23:08.485db...
