06-27-2023 06:48 AM
Hello Everyone
I have FMC 6.6.5 version, and I need to add about 300 entries(Host and Network) in network group object. How to automatize adding proccess? or can I add multiple entries at a time?
Solved! Go to Solution.
06-27-2023 06:53 AM - edited 06-27-2023 06:56 AM
@Irakli G. if using 6.6 you cannot import objects in bulk from the FMC, that feature was only introduced in 6.7. Perhaps use RestAPI and a python script to import the objects in bulk from a CSV file? Or upgrade the FMC, ideally to the Cisco recommended version 7.2.4.
06-27-2023 06:53 AM - edited 06-27-2023 06:56 AM
@Irakli G. if using 6.6 you cannot import objects in bulk from the FMC, that feature was only introduced in 6.7. Perhaps use RestAPI and a python script to import the objects in bulk from a CSV file? Or upgrade the FMC, ideally to the Cisco recommended version 7.2.4.
06-27-2023 06:58 AM
can I add multiple entries at a time?
You can add multi subnet and host under same network object.
06-27-2023 07:25 AM
As @Rob Ingram mentioned, the objects bulk import was added starting from version 6.7. Also, I just want to share that I personally witnessed some issues with the object groups specifically on version 6.6.5 that were not showing properly, so even if you can build up your objects manually, I would recommend to upgrade to the latest suggested release.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide